Here is a video of Lynell showing how to do the double glitter technique, she goes through things step by step. Lynell also shows you how to take care of your stencils and has some great tips. Colouring glitter with ink well who would have thought you could do that?
Category Archive: Tips, Tricks and Videos
May 16 2012
Encrusted Creations from Fran
Dec 15 2011
Amy Shaw
Amy is a good friend of Woodware’s and can be found around the country doing demo’s and workshops, usually with some Woodware products in her craft bag. She has been to the US to train with Sue at USArtQuest, anybody that has been on a course with Sue must admire Amy for her stamina if …
Dec 15 2011
Frantage on Test
Nov 24 2011
Tall Ships Scrapbook Page
Materials List Atremio Scrapbooking Grid – 18002041 – 5 Frames 2 sheets Grey card from Be Unique Metropolitan Pack BU302 1 sheet Magenta MEMOR-210 Artemio Clear Stamps 10001037 VersaMark Ink Pad Large Cardboard Box (spray booth) Memories Mists Stormy Water and the ink pad that comes with it. MMKSW Memories Mists Margareta MM71104 Memories Mists …
Jun 24 2011
Clear Stamps How To
Clear stamps have many advantages over rubber not least you can see through them. When you get your new stamps home tke them out of the packet and remove the bcking sheet save to protect your stamps. When you get a new set of clear stamps be very careful when peeling them off for the first …
May 03 2011
Using Embossing Paste with Brass Stencils
Using Embossing Paste with Brass Stencils This technique looks especially good on dark card stock. It has a sharper edge to it than either dry or thermal embossing and, like dry embossing, it can also be stencilled with colour. The different pastes have various qualities. 1. When using embossing paste on the brass stencils, you …
May 03 2011
Magi Tac
Magi-Tac is a pressure sensitive adhesive which can be used through brass stencils. Tape the stencil down around all four sides in a clockwise direction, with low tack tape. Mask off any areas of the stencil that you do not want included. Use a spatula to scrap the Magi-Tac paste over the stencil. Work …


please add this to you blog to show you are a fan the link is http://www.woodware.co.uk/blog